Forklifts, pallet trucks and tow tractors require separate assessments of traction and working loads. Shift planning matters, but counterweight, interlocks and OEM requirements can be decisive before a battery proposal is feasible.
Who this guide is for
Material-handling dealers, warehouse operators, equipment manufacturers and qualified retrofit integrators.
Identify the exact equipment
Record the forklift, pallet truck or tow tractor model and obtain the equipment maker’s battery requirements. Do not assume that a physically smaller or lighter replacement is an improvement. For counterbalanced equipment, refer battery mass and vehicle stability questions to the OEM or qualified integration team.
Capture a representative shift
Separate travel, lifting, waiting and charging periods in the enquiry. State whether charging breaks are dependable or frequently interrupted. Request a proposal based on the actual shift rather than a continuous-runtime number without a described workload.
Agree integration responsibilities
Ask who will review interlocks, communication, charger operation and fault handling. A matching connector photograph does not establish electrical compatibility. Establish trial acceptance criteria and a service contact before committing a warehouse fleet. This guide is a procurement checklist, not conversion instructions.
Prepare your technical enquiry
- Equipment model and OEM battery mass/size requirements
- Shift profile, lifting and traction demand, charging breaks
- Connector, communication, charger and interlock specifications
Before comparing quotations
Ask each supplier to identify the exact proposed configuration, the evidence supporting its stated specifications, exclusions, and the information still needed from you. Keep reference photographs separate from approved product drawings. Agree how a sample will be evaluated before a production order.
Does this guide confirm product compatibility?
No. It describes information needed for a fit review, not approval of a specific battery or installation.
Can a reference image establish specifications?
No. Request the offered model’s controlled drawing and specification sheet. Concept artwork and third-party reference material are not verified GOTION JTM product data.
What should I send first?
Send your equipment model, available space and operating requirements. Avoid sending personal or confidential information that is not needed for the initial discussion.